OCC / NOC RESIDUE CLEANER FOR NAVY OXYGEN LINE CLEANER
Cleaning Neutralizing Fluid
OCC / NOC RESIDUE CLEANER is a water-based ready to use solution that is used for neutralization and cleaning items contaminated with OCC or NOC (Oxygen Line Cleaner, Navy Oxygen Line Cleaner) residue. OCC / NOC residue can leave white crusty spots or streaks on surfaces when allowed to dry. Testing glassware, even when rinsed after use, can show residue over time. Effective on dried spills on tabletops and floors, stainless steel surfaces as well as glassware. OCC / NOC RESIDUE CLEANER and will dissolve and remove all traces of the white stains from these surfaces.
Application
When using automated cleaning equipment, OCC / NOC RESIDUE CLEANER can be used as provided for heavy encrustation or diluted up to 1:5 with clean water for light contamination. For manual cleaning, the preferred method is to submerge the items in the cleaning solution and soak the items overnight. All traces of white encrustation will be gone. Rinse cleaned items with water. To manually apply OCC / NOC RESIDUE CLEANER, apply the product on the surface by pouring or prewetting a sponge or rag. Spraying is NOT recommended for manual application to avoid appearance of white stains. Always use a clean non-abrasive cloth for wiping away the cleaning fluid. Wipe cleaned surfaces with clean water to remove any remaining cleaning fluid from the cleaned surface. Do not allow solutions of OCC / NOC RESIDUE CLEANER to dry on surface to avoid white staining. When cleaning flooring, testing should be done to make sure the cleaner does not stain the flooring. DO NOT use to clean ceramic vacuum filter flask holders as the product will damage the ceramic filter surface.
Physical Properties
Appearance: Clear to Light Amber Liquid
Freezing Point: 32 Degrees F
Flash Point: Non-flammable
Solubility in Water: Complete
pH: 8.0 – 9.0
Specific Gravity: 1.35 – 1.38